MCI_PAUSE  1901.3S 

The MCI_PAUSE command pauses the current action. CD audio, digital-video, MIDI sequencer, VCR, videodisc, and waveform-audio devices recognize this command.

MCIERROR mciSendCommand(MCIDEVICEID wDeviceID, MCI_PAUSE,
    DWORD dwFlags, (DWORD) (LPMCI_GENERIC_PARMS) lpPause);
 

Parameters

wDeviceID

Device identifier of the MCI device that is to receive the command message.

dwFlags

MCI_NOTIFY, MCI_WAIT, or, for digital-video and VCR devices, MCI_TEST. For information about these flags, see The Wait, Notify, and Test Flags4FW.04J.

lpPause

Address of an MCI_GENERIC_PARMSB1BOEU structure. (Devices with extended command sets might replace this structure with a device-specific structure.)

Return Values

Returns zero if successful or an error otherwise.

Remarks

The difference between the MCI_STOP1OOF_PC and MCI_PAUSE commands depends on the device. If possible, MCI_PAUSE suspends device operation but leaves the device ready to resume play immediately. With the MCICDA, MCISEQ, and MCIPIONR drivers, the MCI_PAUSE command works the same as the MCI_STOP command.

For digital-video devices, the lpPause parameter points to an MCI_DGV_PAUSE_PARMS3PUX_N2 structure.

See Also