LINEADDRCAPFLAGS_ Constants

The LINEADDRCAPFLAGS_ bit-flag constants are used in the dwAddrCapFlags field of the LINEADDRESSCAPSPFGP43 data structure to describe various Boolean address capabilities.

LINEADDRCAPFLAGS_FWDNUMRINGS

Specifies whether the number of rings for a no-answer can be specified when forwarding calls on no answer. If TRUE, the valid range is provided in LINEADDRESSCAPS.

LINEADDRCAPFLAGS_PICKUPGROUPID

Specifies whether a group ID is required for call pickup.

LINEADDRCAPFLAGS_SECURE

Specifies whether calls on this address can be made secure at call-setup time.

LINEADDRCAPFLAGS_BLOCKIDDEFAULT

Specifies whether the network by default sends or blocks caller ID information when making a call on this address. If TRUE, ID information is blocked by default; if FALSE, ID information is transmitted by default.

LINEADDRCAPFLAGS_BLOCKIDOVERRIDE

Specifies whether the default setting for sending or blocking of caller ID information can be overridden per call. If TRUE, override is possible; if FALSE, override is not possible.

LINEADDRCAPFLAGS_DIALED

Specifies whether a destination address can be dialed on this address for making a call. TRUE if a destination address must be dialed; FALSE if the destination address is fixed (as with a "hot phone").

LINEADDRCAPFLAGS_ORIGOFFHOOK

Specifies whether the originating party's phone can automatically be taken offhook when making calls.

LINEADDRCAPFLAGS_DESTOFFHOOK

Specifies whether the called party's phone can automatically be forced offhook when making calls.

LINEADDRCAPFLAGS_FWDCONSULT

Specifies whether call forwarding involves the establishment of a consultation call.

LINEADDRCAPFLAGS_SETUPCONFNULL

Specifies whether setting up a conference call starts out with an initial call (FALSE) or with no initial call (TRUE).

LINEADDRCAPFLAGS_AUTORECONNECT

Specifies whether dropping a consultation call automatically reconnects to the call on consultation hold. TRUE if reconnect happens automatically; otherwise, FALSE.

LINEADDRCAPFLAGS_COMPLETIONID

Specifies whether the completion IDs returned by lineCompleteCall_.SDPR are useful and unique. TRUE if useful; otherwise, FALSE.

LINEADDRCAPFLAGS_TRANSFERHELD

Specifies whether a hard-held call can be transferred. Often, only calls on consultation hold can be transferred.

LINEADDRCAPFLAGS_TRANSFERMAKE

Specifies whether an entirely new call can be established for use as a consultation call on transfer.

LINEADDRCAPFLAGS_CONFERENCEHELD

Specifies whether a hard-held call can be conferenced to. Often, only calls on consultation hold can be added to as a conference call.

LINEADDRCAPFLAGS_CONFERENCEMAKE

Specifies whether an entirely new call can be established for use as a consultation call (to add) on conference.

LINEADDRCAPFLAGS_PARTIALDIAL

Specifies whether partial dialing is available.

LINEADDRCAPFLAGS_FWDSTATUSVALID

Specifies whether the forwarding status in the LINEADDRESSSTATUSGM12S3 structure for this address is valid or is at most a "best estimate," given absence of accurate confirmation by the switch or network.

LINEADDRCAPFLAGS_FWDINTEXTADDR

Specifies whether internal and external calls can be forwarded to different forwarding addresses. This flag is meaningful only if forwarding of internal and external calls can be controlled separately. This flag is TRUE if internal and external calls can be forwarded to different destination addresses; otherwise, it is FALSE.

LINEADDRCAPFLAGS_FWDBUSYNAADDR

Specifies whether call forwarding for busy and for no answer can use different forwarding addresses. This flag is meaningful only if forwarding for busy and for no answer can be controlled separately. This flag is TRUE if forwarding for busy and for no answer can use different destination addresses; otherwise, it is FALSE.

LINEADDRCAPFLAGS_ACCEPTTOALERT

TRUE if an offering call must be accepted using lineAccept11LMZWY to start alerting the users at both ends of the call; otherwise, FALSE. This is typically only used with ISDN.

LINEADDRCAPFLAGS_CONFDROP

TRUE if lineDrop1GH9N4G on a conference call parent also has the side effect of dropping (that is, disconnecting) the other parties involved in the conference call; FALSE if dropping a conference call still allows the other parties to talk among themselves.

LINEADDRCAPFLAGS_PICKUPCALLWAIT

TRUE if linePickupNIB6EE can be used to pick up a call detected by the user as a call-waiting call; otherwise, FALSE.

LINEADDRCAPFLAGS_PREDICTIVEDIALER

This address has enhanced call progress monitoring capabilities which can be applied to outbound calls to determine call states such as ringback, busy, specialinfo, and connected, or the media mode of the device answering the call. It may also have the ability to automatically transfer outbound calls to another address when a call reaches any of a predefined set of states.

LINEADDRCAPFLAGS_QUEUE

This address is not associated with a particular station or physical device, but is a holding place where calls wait for further processing. The calls placed in the queue may receive a particular treatment. They may also be automatically transferred when a particular resource becomes available (for example, if the queue is an ACD queue and calls are waiting for an available agent).

LINEADDRCAPFLAGS_ROUTEPOINT

This address is not associated with a particular station or physical device, but is a holding place where calls wait for routing by the application (the application examines the called address, and can redirect the call to another address). The call may also be automatically transferred if a routing timeout expires (the switch usually assumes a default routing).

LINEADDRCAPFLAGS_HOLDMAKESNEW

When a call on this address is placed on hold (using lineHold85PKXF or external action), a new call is automatically created (most likely in LINECALLSTATE_DIALTONE).

LINEADDRCAPFLAGS_NOINTERNALCALLS

The address is associated with a direct CO line (trunk), and cannot be used to make internal calls on a PBX. The application can use this indication to assist the user in selecting the correct call appearance to use for making a call. When this bit is off, it does not necessarily indicate that the address can be used to make internal calls, because the service provider may not be cognizant of the line type.

LINEADDRCAPFLAGS_NOEXTERNALCALLS

The address is associated with an internal line on a PBX that is restricted in such a way that it cannot be used to place calls to an address outside the switch (for example, it is an intercom). The application can use this indication to assist the user in selecting the correct call appearance to use for making a call. When this bit is off, it does not necessarily indicate that the address can be used to make external calls, because the service provider may not be cognizant of the line type.

LINEADDRCAPFLAGS_SETCALLINGID

The application may choose to set the CallingPartyID member in LINECALLPARAMS7.S3SE when calling lineMakeCallCSIH7C and other functions that accept a LINECALLPARAMS structure. The service provider will, if the content of the ID is acceptable and a path is available, pass the ID along to the called party to indicate the identity of the calling party.

 

No extensibility. All 32 bits are reserved.